KNX LED DIMMER ACTUATOR
PRODUCT DESCRIPTION – LED DIMMER ACTUATOR 350MA/700MA KA/D04.L1.1
The dimmer with LED constant current drive can drive LED directly, has four channels, each channel is independent and with two independent outputs. The output current of each channel can be set by linked switch current button and channel switch current button and can output 350mA/700mA or 700mA/1A.
Power Supply: 21~30V DC, made available by the bus 16 A/250 V AC
Output: 4ch switching/dimming
Input voltage: 0~10 V DC, Max. 100 mA, short-circuit protection
Installation: on 35 mm DIN rail
Temperature Range: Operation -5℃ ~ 45℃ Storage -25℃ ~ 55℃ Transport -25℃ ~70 ℃
Connected load: 250 V 16 A ohmic load
Operating/Display: Red LED and push button for assigning the physical address; flashing green LED means the device is working normally
Dimensions: 90 x 143 x 60 mm
> control switch state of the lamp.
> relative dimming function.
> control instensity values of the lamp.
> state report.
> 15 scenes setting.
> staircase lighting function with end indication.
> preset function, save preset function.