top of page

8-fold pushbutton with backlit text/symbols, proximity sensor and socket point for 2-fold plate (60x55 mm module) - FR



The Ekinex® 20venti series 8-fold pushbutton is used for on/off control of utility devices, dimming of luminaires, control of motorized drives for roller shutters or other programmable control functions. Thanks to the integrated temperature sensor, the button can act as a temperature controller for a room or zone. RGB LED for each rocker. The switch has an integrated KNX bus communication module and is designed for installation in a flush-mounted wall box.

Technical data
  • 30 Vdc power supply by KNX bus

  • Current consumption from bus < 17 mA


Delivery includes a terminal block for connection to the bus, two pairs of fixing screws.


The following accessories are available to be ordered separately:

  • 8 rectangular 30 x 15 mm plastic rockers with or without backlit text/symbol

  • double plate of the Deep and Surface version with 60 x 55 mm window a plastic adapter

  • a metal support for installation onto round or square mounting box (fixing holes 60 mm apart)

Socket point

The French/Belgian standard socket model Ekinex EK-PWS-FR is an E-type wall-mounting device for supplying domestic appliances with up to 16 A 250 V ~.

  • 8 fold version (possibility to configure up to 8 independent functions) 

  • RGB LED for each freely programmable button 

  • Integrated temperature sensor 

  • Integrated proximity sensor

  • Room thermostat function 

  • Plastic casing 

  • Connection to bus line with KNX terminal block 

  • Wall-mounting installation on round or square wall box 

  • IP20 protection degree (installed) 

  • 30 Vdc power supply by KNX bus

Socket point
  • Connection of home devices with AC 250 V ~ voltage

  • Contacts protected by shutters

  • Mounting on a round or square wall box

  • Terminals for cables with section up to 2.5 mm²

Configuration and commissioning

A detailed description of the parameters can be found in the application manual of the device. Configuration and commissioning require ETS5 or later versions. ETS application program: APEKE20TP##.knxprod (## = release).

bottom of page