+30.2108943030

Kit 45 with network analyser and Rogowski coils

ORDERING CODE
EK-MEK-45
DESCRIPTION

Multifunction three-phase compact meter (Enhanced version) for measurement and recording of the electrical parameters. Separated inductive and capacitive counters. Communication in Modbus RTU/ASCII through RS485 port. 1 digital output (DO). Possibilità di aggiornare la versione firmware dello strumento in remoto. Auxiliary power supply (85 … 265 Vac). Mounting in distribution board on EN 60715 rail (4 modular units, each 18 mm).

The meter is delivered in combination with three Rogowski sensors (45 cm length) for detection and measurement of electric currents.

FUNCTIONS / CHARACTERISTICS
[MULTIFUNCTION THREE-PHASE METER]
• Fully bi-directional four quadrants measurements for all energies and powers
• Main electrical parameters measured and displayed for a costeffective consumption analysis
• Version for 1 or 5A CT
• 8 MB for data recording
• Possibility to record MIN/AVG/MAX values for all powers
• MODBUS RTU/ASCII communication by RS485 port
• Possibility to manage the instrument in remote mode by Wintool NETME1 software
[ROGOWSKI COIL]
• Suitable to measure currents from mA to hundreds of kA
• High linearity
• Wide dynamic range
• Use with large size or awkward shaped conductors or in places with limited access
• No danger from open-circuited secondary
• Not damaged by large overloads
• Non-intrusive (no power drawn from the main)
• Light weight (it can be charged on the measured conductor
• Totally shielded
CONFIGURATION AND COMMISSIONING
Not necessary

Ενδιαφερόμαστε για τα προϊόντα σας!

 

Γραφτείτε στο Newsletter μας για να λαμβάνετε πρώτοι τις προσφορές μας στο Email σας. 

 

 

Η εγγραφή σας έγινε με επιτυχία!