+30.2108943030

Fancoil controller

ORDERING CODE
EK-HB1-TP
DESCRIPTION

[PRODUCT IN PREPARATION]

KNX bus device with actuator function (in combination with a KNX room temperature controller) or controller / actuator (with acquisition of the temperature value by KNXsensor or by a sensor connected to an analog input). For installations in 2-pipe hydraulic distribution systems with ON / OFF control of an electrothermal actuator on a shut-off valve and 0-10 V control of a fan with brushless motor. The outputs not used for controlling a fan coil unit can be configured as KNX binary output channels to carry out otherapplications. Mounting in distribution board on EN 60715 rail (4 modular units, each 18 mm). To be used in KNX installations for home and building automation.

FUNCTIONS / CHARACTERISTICS
• Power supply from the bus and auxiliary power supply 230 Vac 50/60 Hz
• Control of 2-pipe hydraulic distribution systems with shutoff valve ON/OFF (1 SPST relay)
• 1 output 0-10 V for control of a fan with brushless motor
• 2 inputs freely configurable for acquisition of passive temperature sensors (10 kΩ NTC at 25°C) or as potential-free binary inputs
CONFIGURATION AND COMMISSIONING
A detailed description of the parameters can be found in the application manual of the device. Configuration and commissioning require ETS4 or later versions. ETS application program: APEKHB1TP##.knxprod (## = release). Available languages: English, French, German, Italian

Ενδιαφερόμαστε για τα προϊόντα σας!

 

Γραφτείτε στο Newsletter μας για να λαμβάνετε πρώτοι τις προσφορές μας στο Email σας. 

 

 

Η εγγραφή σας έγινε με επιτυχία!