KA/D0103.1, KA/D0203.1, KA/D0403.1


The dimmer is a device dimming the luminaries directly by the data in the memory, and the data is processed in advance in the programming software according to the distribution characteristics of the luminaries’ brightness. The controller transfers the brightness data value to output voltage to control the brightness of the luminaries. It can be programmed to customize the rooms’ environment to build the various scenes, such as “watch movie”, “dinner”, “entertainment” so on. The brightness value can be set as any value (1-100%). It is able to set the duration time to dim up or down to the target brightness value and the gradual change speed to extend the luminaries life and save energy.

Power Supply: 21~30V DC, bus powered

Current: <12mA

Power comsuption: Max. 360mW

Installation: on 35 mm DIN rail

Temperature Range: Operation -5℃ ~ 45℃ Storage -25℃ ~ 55℃ Transport -25℃ ~70 ℃

Outputs: 1ch/2ch/4ch

Rated Voltage Current: 230 VAC (50/60 Hz), dimming via phase control

Operating/Display: Red LED and push button for assigning the physical address; flashing green LED means the device is working normally

Dimmension: 1ch switch actuator 71,5 x 90 x 60 mm, 2ch switch actuator 143 x 90 x 60 mm, 4ch switch actuator 214,5 x 90 x 60 mm

> control switch state of the lamp.
> relative dimming function.
> control intensity values of the lamp.
> state report, error report.
> 15 scenes setting.
> staircase lighting function with end indication.
> reset function.
> preset function, save preset function.

Ενδιαφερόμαστε για τα προϊόντα σας!


Γραφτείτε στο Newsletter μας για να λαμβάνετε πρώτοι τις προσφορές μας στο Email σας. 



Η εγγραφή σας έγινε με επιτυχία!