Room temperature controller with relative humidity sensor
Description
The Ekinex® room temperature controller of FF series regulates independently the temperature of a room or a zone. In combination with one or more KNX actuators, the room temperature controller is able to control the heating and cooling emission of a series of terminal units for the thermal exchange (such as radiators, fan-coils, floor and ceiling radiant panels, etc.). The device is provided with a LCD-display with adjustable backlight, sensors for temperature, relative humidity and brightness measuring and two freely configurable inputs. The LEDs can be chosen in the colour combinations blue / green or white / red. The device integrates a KNX bus communication module and is intended for mounting onto a wall mounting box; it is powered by a SELV voltage directly from the KNX bus and does not require any auxiliary power supply.
Technical data
-
30 Vdc power supply by KNX bus
-
Current consumption from bus < 13 m
Delivery
Delivery includes a terminal block for connection to the bus, a metal support for installation onto round or square mounting box (fixing holes 60 mm apart) and two pairs of fixing screws.
Accessories
The following accessories are available to be ordered separately:
-
set of two square rockers with symbols for room thermostat
-
square frame Form or Flank version
-
LCD display with adjustable backlighting
-
2 keys for controlling the thermostat functions
-
4 freely programmable LEDs for each button
-
2 colour combinations available for LEDs (blue/green or white/red)
-
Integrated temperature and relative humidity sensor
-
2 freely programmable inputs
-
Plastic housing
-
Bus line connection via KNX terminal
-
Programming button and LED on front panel
-
Recessed wall mounting on round or square box
-
IP20 degree of protection (installed)
-
Weight 85 g (with mounting bracket)
Configuration and commissioning
A detailed description of the parameters can be found in the application manual of the device. Configuration and commissioning require ETS5 or later versions. ETS application program: APEKE20TP##.knxprod (## = release).
