top of page

Easy room temperature controller

Description

The Ekinex® Easy room thermostat FF-series is a digital electronic thermostat with a user-friendly interface for the end user and system integrator. While using a single differentiated set point for heating and cooling with only one on/off operating mode, the unit allows the control of terminals with one or two stages (such as radiators, floor and ceiling radiant panels, etc.) and fan-coil units with 2 or 4 pipe hydraulic supply. The product is equipped with an LCD display with adjustable back-lighting, a sensor for room temperature measurement and two freely configurable inputs. The indicator LEDs can be chosen in blue/green or white/red colour combinations. The device has an integrated KNX bus communication module and is designed for installation in a flush-mounted wall box; it is powered by the KNX bus and requires no auxiliary power supply.

Technical data
  • 30 Vdc power supply by KNX bus

  • Current consumption from bus < 13 m

Delivery

Delivery includes a terminal block for connection to the bus, a metal support for installation onto round or square mounting box (fixing holes 60 mm apart) and two pairs of fixing screws. 

Accessories

The following accessories are available to be ordered separately:

  • set of two square rockers with symbols for room thermostat

  • square frame Form or Flank version

  • LCD display with adjustable backlighting
    2 keys for controlling the thermostat functions
    4 freely programmable LEDs for each button
    2 colour combinations available for LEDs (blue/green or white/red)
    Integrated temperature sensor
    2 freely programmable inputs
    Plastic housing
    Bus line connection via KNX terminal
    Programming button and LED on front panel
    Recessed wall mounting on round or square box
    IP20 degree of protection (installed)
    Weight 85 g (with mounting bracket)

Configuration and commissioning

A detailed description of the parameters can be found in the application manual of the device. Configuration and commissioning require ETS5 or later versions. ETS application program: APEKE20TP##.knxprod (## = release).

bottom of page