PRODUCT DESCRIPTION – RS 485 CONVERTER BTPT-01/485.1

The RS485/ KNX converter can transfer two-way signals. The users can configure or program the RS485 devices according to the protocol to achieve the control. The RS485/ KNX converter has two working modes: the monitor mode and the filter mode. In the case of the monitor mode, all active telegrams can be forwarded. In the filter mode, only the telegrams those with a group address in the filter table in the RS485/ KNX converter will be forwarded to the other side. The filter table can be set via the filter table setting command from RS485 bus system.

Power Supply: 21~30V DC, bus powered

Current: <12 mA

Power comsuption: Max. 360 mW

Installation: on 35 mm DIN rail

Temperature Range: Operation -5℃ ~ 45℃ Storage -25℃ ~ 55℃ Transport -25℃ ~70 ℃

Dimmension: 64 x 90 x 36 mm

FUNCTIONS:
> open protocol for RS485 communication interface.
> support controlling KNX devices via RS485 by pre-defined protocol.
> covert the RS485 bus package, assembly to EIB telegram, then send to the KNX/EIB network to control the KNX devices.
> ACK report, executive result report.
> ability of reading and writing data defined in KNX standard