+30.2108943030

RS 232 CONVERTER

PRODUCT DESCRIPTION – RS 232 CONVERTER BTCC-02/232.1

 

The RS232/ KNX Controller as an interface device, supports point to multipoint one-way communication and its maximum communication distance is 15m. The KNX/EIB bus control system can send a telegram to the RS232/ KNX Controller, and then transfer to the RS232 devices by the Controller.

Power Supply: 21~30V DC, bus powered

Current: <12 mA

Power comsuption: Max. 360 mW

Installation: on 35 mm DIN rail

Temperature Range: Operation -5℃ ~ 45℃ Storage -25℃ ~ 55℃ Transport -25℃ ~70 ℃

Dimmension: 64 x 90 x 36 mm

FUNCTIONS:
> support telegram with up to 64 bytes and 128 commands.
> trigger the telegram sending process through group address.
> 2 three-wire standard independent serial ports connected by bindingpost to devices (flow control unsupported).
> communication rate, stop bit and parity of the ports are programmable.
> pre-defined serial communication protocol supported, so that controlling and examining KNX devices is possible.
> max. communication distance: 15m.

Ενδιαφερόμαστε για τα προϊόντα σας!

 

Γραφτείτε στο Newsletter μας για να λαμβάνετε πρώτοι τις προσφορές μας στο Email σας. 

 

 

Η εγγραφή σας έγινε με επιτυχία!