PROFINET – KNX gateway
ORDERING CODE
EK-BN1-TP
DESCRIPTION
Device working as a gateway (protocol conversion) between a PROFINET network and a KNX (TP) network. Slave function on PROFINET network. Mounting in distribution board on EN 60715 rail (4 modular units, each 18 mm). To be used in KNX installations for home and building automation.
FUNCTIONS / CHARACTERISTICS
PROFINET side
• Ethernet (IEEE 802.3) communication port, RJ45 connector, at least 5E cable category
• PROFINET slave communication
• PROFINET register exchange
• Volatile support memory with “PROFINET image” buffer of 1440 bytes
KNX side
• KNX TP (twisted pair) 9600 baud communication port, electrically insulated from power supply
• Volatile support memory with “image KNX” buffer of 1440 bytes
• Ethernet (IEEE 802.3) communication port, RJ45 connector, at least 5E cable category
• PROFINET slave communication
• PROFINET register exchange
• Volatile support memory with “PROFINET image” buffer of 1440 bytes
KNX side
• KNX TP (twisted pair) 9600 baud communication port, electrically insulated from power supply
• Volatile support memory with “image KNX” buffer of 1440 bytes
CONFIGURATION AND COMMISSIONING
A detailed description of the parameters can be found in the application manual of the device. Configuration and commissioning require the application software CGEKBN1TP.exe
