PRODUCT DESCRIPTION – 3,5″ TEMPERATURE CONTROL PANEL CHTC-86/01.1.11

The CHTC-86/01.1.11 room thermostat touch panel is a KNX ambient temperature controller suitable for fan coil systems and universal heat pump applications. There are different kinds of control modes, including continuous PI control, PWM control, 2-point control and fan coil control, and different types of control modes are suitable for different types of heating or cooling control systems. It also provides two threshold functions, two logic functions, 16 timer setting functions, four push-button interface functions and six touch buttons. With these functions the panel can be used to regulate temperature and humidity in the room in an energy-efficient way.

Power Supply: Operating voltage 21-30V DC, made available by the EIB BUS

Current: <12mA

Power comsuption: Max. 360mW

Operating/Display: Red LED light and button are used to distribute physical address, flashing green shows proper operation

Detecting Range 0 ~ 70°C

Humidity Accuracy: 5 %

Humidity Range: 0 ~ 100%

Installation: in 86 mm box mounted

Temperature Range: Operation -5℃ ~ 45℃ Storage -25℃ ~ 55℃ Transport -25℃ ~70 ℃

Dimmensions: 86 x 86 x 32 mm

FUNCTIONS:
> with capacitive touchscreen tech., and high-contrast screen to achieve excellent display.
> with temperature’s setting and displaying are available, and option between centigrade temperature and Fahrenheit temperature are optional.
> whe panel has its own sensor to detect and display room’s temperature and humidity.
> function of temperature control, with temperature control algorithm by itself.
> unction of modes and wind speeds’ selection. There are modes of refrigeration and heating for option, and modes of comfort, sleep, standby, and protection, while wind speeds of 3: high, medium and low. The mode affects the wind speed
> function of cycle timer
> display clock and week. Time can be updated via KNX net
> backlight brightness is adjustable
> function of warning tone. Panel warns when button is pushed, and this function can be activated/deactivated via ETS
> 1fold input for thermistor sensor
> 3 folds input for universal interface